NT Labs

NT Labs

Showing 1–9 of 23 results

  • NT Labs

    NT LABS HARDNESS TEST

    What is KH?
    KH, also known as “total alkalinity” or “carbonate hardness”, is a measure of the buffering capacity of the water in your aquarium. The buffering capacity refers to how well it can resist changes in pH.

    What is GH?
    General Hardness is a measure of the total amount of minerals dissolved in the water. Water hardness lies on a spectrum between ‘soft water’ or ‘hard water’ depending on the amount of dissolved minerals: the more minerals present, the greater the hardness. Hard water is responsible for the build-up of limescale.

    Buy now
  • NT Labs

    NT LABS BROAD RANGE pH TEST

    What is pH?
    The new Broad Range pH Test is for testing water within the pH range of 6 – 9. This pH test now covers the pH range more likely observed in your aquarium and also offers improved precision with 0.5 unit determination.

    What is the correct pH level?
    There is no definitive correct pH as different fish species have their preferred pH range. Generally, the ideal pH value will lie between 7 and 8, but there are some exceptions. When purchasing fish from your local aquatic retailer, always enquire as to the specific water requirements of the fish you are buying.

    What do I do if the level is wrong?
    If you do need to adjust the pH of your aquarium, it is vital to do this slowly to not shock the fish. Change no more than 0.5 pH units per 2 days. Providing your tap water is of suitable pH, substantial water changes can correct a dangerous pH level. It is also important to check the KH of the aquarium. Use of pH adjusters, such as KH Up – pH Stabiliser will raise the pH caused by soft or aged water. For fish that live in soft, acid water use bogwood to gently lower the pH and soften the water.

    Buy now
  • NT Labs

    NT LABS NARROW pH TEST

    What is pH?
    For fish with specific pH requirements or for general tropical community aquaria requiring a neutral pH, the pH 6–7.6 Test provides quick and accurate pH measurement. It also offers precision with 0.2 unit determination.

    What is the correct pH level?
    There is no definitive correct pH as different fish species have their preferred pH range. Generally, the ideal pH value will lie between 7 and 8, but there are some exceptions. When purchasing fish from your local aquatic retailer, always enquire as to the specific water requirements of the fish you are buying.

    What do I do if the level is wrong?
    If you do need to adjust the pH of your aquarium, it is vital to do this slowly to not shock the fish. Change no more than 0.5 pH units per 2 days. Providing your tap water is of suitable pH, substantial water changes can correct a dangerous pH level. It is also important to check the KH of the aquarium. Use of pH adjusters, such as KH Up – pH Stabiliser will raise the pH caused by soft or aged water. For fish that live in soft, acid water use bogwood to gently lower the pH and soften the water.

    Buy now
  • NT Labs

    NT LABS NITRATE TEST

    What is nitrate?
    Nitrate is produced by the beneficial bacteria in the water and filters as they break down the fish’s toxic waste products (ammonia and nitrite). Nitrate is not typically toxic to fish, but excessively high levels (>100mg/l) can cause problems with growth.

    What is the correct nitrate level?
    The level of nitrate is dependent upon a number of factors, including the nitrate level of the tap water (or spring water etc) feeding into the aquarium, the number of fish and the amount of food fed. High nitrate levels will lead to algal growth. A nitrate level of zero is ideal and implies a balance between waste produced by the fish and nutrients taken up by the plant life. Remember: this plant life does include algae.

    What do I do if the nitrate level is wrong?
    Maintenance of a zero level of nitrate is extremely difficult. Most domestic water supplies have a low level of nitrate. The key to maintenance of low nitrates is regular water changes to dilute the build up of nitrate. Also, increasing the higher plant life in the aquarium should use up nitrate. This will lower the amount of nitrate available to algae.

    Buy now
  • NT Labs

    NT LABS NITRITE TEST

    What is nitrite?
    Nitrite is produced by beneficial filtration bacteria as they break down the harmful waste ammonia excreted by the fish. Like ammonia, it is not visible to the naked eye. Although it is not as toxic as ammonia, nitrite is still very damaging to the health of the fish. Nitrite itself is broken down into nitrate, which is practically harmless to fish.

    What is the correct nitrite level?
    There is no occasion where any nitrite is tolerable in an aquarium. A level of zero mg/L (ppm) should be maintained at all times.

    What do I do if the Nitrite level is wrong?
    If 0.25 – 0.5 mg/l (ppm) of nitrite is found, then add Filter Starter. If a level above this is recorded, then a substantial water change is essential. Change 25% of the water volume for 1 mg/l (ppm) nitrite and 50% for nitrite levels above this. If any level of nitrite is detected Ammonia Remover will remove ammonia (and thus nitrite) from the water and can be recharged. If you do record a nitrite level, then it is important to check other vital water quality parameters, especially pH and ammonia.

    Buy now
  • NT Labs

    NT LABS AMMONIA TEST

    What is ammonia?
    Ammonia is the main waste product produced by fish as a result of feeding. It can also be generated by the decay of uneaten food or decaying organic matter, such as plant leaves. It is invisible to the naked eye and its presence or absence cannot be determined by looking at the water alone. It is extremely toxic to the fish but is broken down into less toxic nitrite by the beneficial bacteria found in the filter.

    Buy now
  • NT Labs

    NT LABS AQUARIUM LAB MULTI-TEST KIT

    • Easy to Use
    • Six Essential Tests for Freshwater Aquariums
    • Accurate Liquid Drop Tests for Reliable Results – Much More Accurate Than Water Test Strips
    • Includes a Water Quality Guide, Colour Charts, and an Integrated Test Tube Rack
    • Up to 200 Tests (combined)
    Buy now
  • NT Labs

    NT LABS ALGAE GONE

    Green water/algae caused by over feeding and fish waste is unsightly in an aquarium, and can be dangerous as it may alter the pH and oxygen levels. Algae Gone is a single-dose, plant-friendly treatment that will clarify the green or cloudy water in your aquarium. It works by clumping the minute particles together enabling your filter to strain them out.

    Algae Gone will also help to lower algae- causing phosphate, thereby promoting a healthier aquatic environment. Use when the water has become green or cloudy.

    Buy now
  • NT Labs

    NT LABS PLANT BOOST

    Live plants require light and nutrients to grow. Whilst your aquarium light will provide one element, plants will rapidly consume nutrients from the water. These nutrients must be replaced to ensure your plants continue to grow and thrive.

    Plant Boost can be used every day to maintain healthy plant growth. Don’t forget that plants need between 8-12 hours of light a day.

    Buy now